Xycom 3500 Series Manual page 8

3500 Series Flat Panel Industrial PC
1. Attach an optional keyboard to the keyboard port.
2. Attach other optional equipment following the instructions in Chapter 3.
3. Attach the power cord from the power receptacle to a properly grounded 115/230
VAC, 50-60 Hz outlet or a 24 VDC outlet, whichever applies (Refer to the Creating
a Power Cable section in Chapter 3 for more information.)
4. Turn on the power to the unit. Depending on your operating system, one of the fol-
lowing will occur:
•
•
5. Install application software via the floppy, a network connection, the IR port, or a
CD-ROM.
8
In DOS, the system will boot up at the C: prompt
In Windows 95 or Windows NT the License Agreement will be displayed