Introduction - Agilent Technologies 4100 Site Preparation Manual

This guide contains the information required to successfully prepare
a site for an Agilent 4100 Microwave Plasma Atomic Emission
Spectrometer (MP-AES) instrument installation.
On completion of the site preparation, fill in the check-list on Page 9,
(striking out those entries not applicable), and send this check-list to
your local Agilent agent or Agilent sales and service office. As soon
as it is received, Agilent or its agent will contact you to arrange a
convenient time for installation.
References to the Agilent 4100 MP-AES instrument are applicable to
all models and configurations unless otherwise stated.
In case of difficulty in preparing for the installation, and for details
of operator training courses, please contact your Agilent sales
representative or field service engineer at the address given below:
Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide

1. Introduction

Installation Guidelines
Site Preparation Check-list
Introduction
8
9
7