Monochromator Optics Air Purge - Agilent Technologies 4100 Site Preparation Manual

Table 7. EGCM Gas specifications
Purity
Oxygen
Water vapor
Quality
Permissible pressure range 450–600 kPa (65–87 psi)
Recommended pressure
Required flow rates
A nitrogen generator may be used to supply nitrogen to the ECGM. However, it
NOTE
must be a separate unit from that used for the instrument.

Monochromator Optics Air Purge

(Part number G8000-68001)
The monochromator is a precision mechanical device and its
continued stable and reproducible operation relies on clean
corrosion free surfaces.
The Monochromator Optics Air Purge accessory is designed to
minimize the ingress of particles and corrosive vapors, commonly
encountered in the typical laboratory, into the monochromator by
providing a continuous flow of clean, dry, oil-free and dust free air
into the monochromator assembly. The use of this accessory provides
additional protection for your instrument.
Agilent 4100 Microwave Plasma Atomic Emission Spectrometer Site Preparation Guide
Nitrogen
99.95 %
< 0.05 %
< 4 ppm
n/a
500 kPa (72.5 psi)
10 SLPM
Accessories and Options
Air
n/a
n/a
n/a
ISO 8573-1:2010 CLASS
1.4.3
450–600 kPa (65–87 psi)
600 kPa (87 psi)
1.5 SLPM
39