Simplified Sequence - Siemens SINAMICS S120 System Manual

4.17.2

Simplified sequence

Measuring the characteristic and optimizing the HLA is shown in a simplified fashion as
follows:
1. After calling the HLA optimization, you go to the start dialog:
Figure 4-25 Measure valve characteristic
2. Using the "Measure" softkey, go to the "Measurement" dialog, and there, start the
characteristic measurement using the "Start measurement" softkey:
Hydraulic Drive
System Manual, 04/2015, 6SL3097-4BA00-0BP1
Commissioning
4.17 Editing the valve characteristic
83