Cascading - Hettich LegaDrive Operating And Installation Instructions

7. Operation
5. Unplug the control unit's power supply
and wait at least 5 seconds.
6. Plug the control unit's power supply back
in again.
7. Carry out a manual reset (see Section
7.4.4 for details).

7.5.10 Cascading

Cascading provides the capability of connecting several control
units for operating as many as twelve lifting columns running in
synchrony.
Note
i
Parameters must first be set to define whether a
control unit is used for cascading. Functions may
vary slightly from those of an individual control
unit.
Note
i
For further information on cascading please refer
to the manufacturer's separate operating inst-
ructions on "Cascading LegaDrive control units".
42