Introduction; Information On Signs, Symbols And Markings - Hettich LegaDrive Operating And Installation Instructions

1. Introduction

These operating and installation instructions are intended to
make it easier for you to become familiarised with the lifting
column system and use its capabilities in the proper manner.
These operating and installation instructions contain impor-
tant information on installing the lifting column system safely
and in the proper manner. Following them will help to avoid
hazards, repair costs and down times, enhance reliability and
prolong service life.
Existing national regulations on preventing accidents and on
protecting the environment are also applicable.
These operating and installation instructions must be read
and applied by all persons instructed to carry out work on the
system's components, e.g.:
· Installation
· Operation
· including troubleshooting while working, care, disposal
· Maintenance
· Servicing, inspection, repair and
· Transportation.

1.1 Information on signs, symbols and markings

The safety advice in the operating and installation instructions is
structured as follows:
Danger
Danger!
This danger note draws attention to an immedi-
ately dangerous situation that will lead to death
or serious injuries if the safety measures are not
followed.
Warning
Warning!
This danger note draws attention to a potentially
dangerous situation that may lead to death or
serious injuries if the safety measures are not
followed.
Caution
Caution!
This danger note draws attention to a potenti-
ally dangerous situation that may lead to minor
or slight injuries if the safety measures are not
followed.
Note
i
This advice draws attention to potential damage
to property or to a process of particular interest /
importance that may occur if the safety measu-
res are not followed.
5