Installing Legadrive Touch Comfort Handset; Fig. 29: Position For Installing Legadrive Touch Comfort Handset; Fig. 30: Position Of Screw Holes For Installing Legadrive Touch; Fig. 31: Attaching Legadrive Touch Comfort Handset To - Hettich LegaDrive Operating And Installation Instructions

Hide thumbs Also See for LegaDrive:

Table of Contents

5. Transportation and installation

Fig. 29. Position for installing

LegaDrive Touch Comfort handset

Attach the handset with 4 screws. To to this, use all 4 screw holes

shown below.

Fig. 30. Position of screw holes for installing LegaDrive Touch

Comfort handset.

Note

The manufacturer recommends predrilling the

4 screw holes in the desk top. This stops the

mounting plate from twisting when screwing

down the handset and making it difficult for the

control panel to move in and out or even preven-

ting it from doing so.

Note

The following screw types must be used for atta-

ching the LegaDrive Basic handset:

- cylinder head screws

- roundhead screws

- panhead screws

Maximum thread diameter: 5 mm

Maximum head diameter: 10 mm

Fig. 31. Attaching LegaDrive Touch Comfort handset to example

desk

Table of Contents