Display Functions; Display Lock; Fig. 48: Display On Legadrive Touch Handset; Fig. 49: The Key Symbol Indicates Activated - Hettich LegaDrive Operating And Installation Instructions

7. Operation

7.2. Display functions

Note
i
You can only use the following control unit func-
tions if you have a handset with a display (such
as LegaDrive Touch Inlay or LegaDrive Touch
Comfort).
The LegaDrive Touch handset has a 4-digit display with optional
decimal point for showing position and information. This is capa-
ble of displaying current desk height, fault messages and menus.
The unit in which desk height is displayed and the decimal point
settings are determined by the motor control parameters.
Fig. 48. Display on LegaDrive Touch handset
SAVE

7.3. Display lock

Note
i
You can only use the following control unit func-
tions if you have a handset with touch functio-
nality and display (such as LegaDrive Touch Inlay
or LegaDrive Touch Comfort).
The display lock is activated or deactivated by swiping your finger
across the display. The display shows a key symbol on activating
the lock.
Fig. 49. The key symbol indicates activated display lock
1 2
3 4
Fig. 50. The LegaDrive Touch Comfort handset lock is activated and
deactivated by swiping to the left or right
1
2
Fig. 51. The LegaDrive Touch Inlay handset lock is activated and deacti-
vated by swiping to the left or right
Note
i
The swiping direction is irrelevant. (see Figures
50 and 51)
Note
i
Be careful only to swipe lightly over the display
without pressing any of the buttons.
Note
i
The display must be active at the time of ac-
tivating / deactivating the lock (e.g. indicating
current height). The display can be activated by
briefly pressing one of the buttons, e..g, the UP
button.
SAVE
SAVE
SAVE
33