Hettich LegaDrive Operating And Installation Instructions page 38

7. Operation
If you have a handset with display (such as LegaDrive Touch Inlay
or LegaDrive Touch Comfort), proceed as follows:
No. Button
1. Move the desk top to the position you
wish to use as the new pedestal stop /
or
shelf stop position.
To do this, press the desk position down
or desk position up buttons until the
chosen position is reached.
2. Press the SAVE-button and keep it
SAVE SAVE
pressed for approx. 10 seconds. The
control unit clicks twice once the position
has been memorised.
38
Function
To deactivate a pedestal stop / shelf stop position, proceed as
follows:
Note
i
These steps must be performed separately for a
pedestal stop position and a shelf stop position.
No. Button
1. Move the desk top to any position in the
lower half of the travelling range to deac-
or
tivate the pedestal stop or to any position
in the upper half of the travelling range
to deactivate the shelf stop. To do this,
use the desk position down or desk posi-
tion up buttons until the chosen position
is reached.
Simultaneously press the desk position
2.
up and desk position down buttons and
keep both buttons pressed for approx. 10
seconds.
The control unit clicks once when the
position has been deactivated.
If you have a handset with display (such as LegaDrive Touch Inlay
or LegaDrive Touch Comfort), proceed as follows:
No. Button
1. Move the desk top to any position in the
lower half of the travel range to deacti-
or
vate the container stop or to any position
in the upper half of the travel range to
deactivate the shelf stop. To do this, use
the desk position down or desk position
up buttons until the chosen position is
reached.
2. Press the SAVE-button and keep it
SAVE SAVE
pressed for approx. 10 seconds. The
control unit clicks once when the position
has been deactivated.
Function
Function