Safety - Hettich LegaDrive Operating And Installation Instructions

3. Safety

The following hazard zone markings are used in the operating
and installation instructions (in accordance with Technical Rule
for Working Places ASR A1.3):
Danger
Danger from electric shock!
Working on live components in the improper
manner presents a danger to life!
Work on electrical equipment must only be car-
ried out by authorised electricians!
Warning
Risk of injury!
The lifting columns pose a risk of injury when
they are moving. Before attempting any work,
disconnect the lifting column system from power
supply and take action to prevent the power
supply cable from being plugged back in unin-
tentionally!
Caution
Tripping hazard!
The desk support and power supply cable pose of
risk of injury from tripping over.
Caution
Hand injuries!
Hand could be crushed or otherwise injured.
Never reach into moving parts!
Only set the desk support in motion when there
is nobody in the hazard zone!
10
The following hazard markings must be affixed directly to the
desk where they are visible:
Warning
Danger of crushing!
Do not position any objects of parts of the body
below the desk support or between the cross
members. Failure to observe this warning may
result in serious injuries or death!
Warning
Danger of crushing!
max.
KG
Do not overload!
Only load the desk support up to the maximum
intended load. Overloading may result in breaka-
ge and serious injuries!