Adjusting Desk Top To A Memorised Position; Changing Desk Top Position Height Display - Hettich LegaDrive Operating And Installation Instructions

7. Operation

7.4.2 Adjusting desk top to a memorised position

This function lets you move the desk top to a memorised desk top
position. To move to a memorised desk top position, proceed as
follows:
No. Button
1. Press the chosen memory position button
2
(e.g. 2) and keep it pressed. The desk top
will continue to move until the memo-
rised desk top position is reached. If you
let the button go before reaching the
memorised desk top position, the desk
top will stop and the memorised desk top
position will not be reached.
2. Release the memory position button as
2
soon as the memorised desk top position
has been reached.
The display shows the current (memo-
rised) desk top position.
Function

7.4.3 Changing desk top position height display

This function is used for adjusting the height indicated on the
handset display to the desk top's actual height. To make this
adjustment, proceed as follows:
Note
i
Please note that this setting process does not
alter the desk top's position. Only the indication
on the display changes.
Note
i
This function is only provided for handsets with
integrated display.
No. Button
1. Press the SAVE-button.
SAVE SAVE
The display shows S –.
2. Press the desk top down button for ap-
prox. 5 seconds (downwards arrow). The
display starts to flash.
Now set the height display using the desk
3.
top down (downwards arrow) or desk top
up button (upwards arrow).
4. Press the SAVE-button.
SAVE SAVE
The height display is now set to the desk
top position entered.
Function
35