Installing Legadrive Touch Inlay Handset; Fig. 25: Legadrive Touch Inlay Handset; Fig. 26: Cut Out For Installing Legadrive Touch Inlay Handset; Fig. 27: Attaching Legadrive Touch Inlay Handset To - Hettich LegaDrive Operating And Installation Instructions

5. Transportation and installation

5.2.3.4 Installing LegaDrive Touch Inlay handset

Fig. 25: LegaDrive Touch Inlay handset

Install the handset at an appropriate position in the desk top.
To install the LegaDrive Touch Inlay handset under the desk top,
proceed as follows:
1. Unpack handset.
Note
i
Dispose of the packaging material in an environ-
mentally friendly manner (plastic film with
plastic waste, cardboard with paper waste)!
2. Drill / cut out an installation hole. The cut out is illustrated
below.

Fig. 26: Cut out for installing LegaDrive Touch Inlay handset

with rubber fins
3. Insert the handset from above into the previously drilled hole
in the desk top. The handset is installed without additional
screws, the rubber fins hold it in position.
Fig. 27: Attaching LegaDrive Touch Inlay handset to example desk
39,2 mm
93 mm
5.2.3.5 Installing LegaDrive Touch Comfort handset

Fig. 28: LegaDrive Touch Comfort handset

Install the handset at an appropriate position underneath the
desk top. To do this you will need the following tools:
· 1 x screwdriver
· 4 x screws
Note
i
Please note that the handset has a Push to open
function. Install the handset in the extended
position to make all screw holes accessible.
To install the LegaDrive Touch Comfort handset under the desk
top, proceed as follows:
1. Unpack handset.
Note
i
Dispose of the packaging material in an envi-
ronmentally friendly manner (plastic film with
plastic waste, cardboard with paper waste)!
2. Position handset at chosen position under desk top, making
sure that the handset is in easy and convenient reach. The
front edge of the handset should not project beyond the
edge of the desk so as not to get in the way when you are
working.
23