Extended Functions; Memorising A Desk Top Position - Hettich LegaDrive Operating And Installation Instructions

7. Operation

7.4 Extended functions

Note
i
You can only use the following control unit
functions if you have a handset with memory
position buttons and a memory button.
34

7.4.1 Memorising a desk top position

This function memorises a defined desk top height (one desk top
height can be memorised per memory position button). To memo-
rise a desk top position, proceed as follows:
Note
i
If the control unit is being switched on for the
first time, all memorised positions provide the lo-
west desk top height (bottom desk top position).
No. Button
1. Move the desk top to the desk top positi-
on you want.
The display shows this position (e.g. 73
cm).
2. Press the SAVE-button.
SAVE SAVE
The display shows S –.
3. Press the chosen memory position but-
2
ton (e.g. 2).
The display shows S 2.
The desk top position setting will now
be memorised on the memory position
button selected. You will hear the control
unit click twice and the memorised desk
top position will be displayed after ap-
prox. 2 seconds.
Function