Safety Advice For The User Company; Safety Information For The Operating Personnel - Hettich LegaDrive Operating And Installation Instructions

3. Safety

3.1 Safety advice for the user company

All persons entrusted with operating the lifting column system
LegaDrive (include line managers) must familiarise themselves
with the section on "Safety". The safety advice must be followed.
Warning
Never
· operate the desk support if there is anyone in
the hazard zone.
· operate the desk support in a private environ-
ment.
· remove covers or enclosures and take protective
guards out of operation.
· continue operating the desk support if changes
occur that adversely affect safety.
· manipulate or circumvent protective guards.
· use for normal operation without protective
guards in place.
The lifting column system LegaDrive must only be operated if
it is in proper working order. The user company will issue clear
responsibilities, e.g. for servicing, cleaning or repair, and ensure
that the persons carrying out this type of work have received the
training necessary for it.
The safety regulations and employers' liability insurance associ-
ation regulations applicable in the owner's country must also be
observed. Refrain from any work that adversely affects operating
safety.
The operating personnel will check the desk support for changes
or malfunctions, report such to the safety officer responsible and,
if necessary, take this product out of operation.
Only appropriate tools must be used for the work that needs to
be done; remove tools after completing work.
3.2 Safety advice for operating personnel
The desk support must only be put into operation in a fully ins-
talled and operational state.
The generally recognised code of occupational health and safety
as well as accident prevention regulations must be observed.
The desk support must only be operated if all protective guards
and safety-related equipment, e.g. protective claddings or enclo-
sures, are in working order and undamaged.
On putting the system into operation, the operator must make
sure that all safety equipment and protective guards as well as
the controls are in correct working order and free of damage.
Work on the desk support must only be carried out by instruc-
ted, skilled personnel. Only skilled personnel who have received
training or instruction must be deployed.
Immediately leave the area around the desk if it starts moving
unintentionally. Immediately disconnect the lifting column
system LegaDrive from the power supply. Have the desk support
repaired by a specialised company. Only put the desk support
back into operation after it has been repaired.
Immediately take the desk support out of operation if you notice
anything unusual (noises, fumes, smoke etc.) at the desk support.
Immediately disconnect the lifting column system LegaDrive from
the power supply. Have the desk support repaired by a specialised
company. Only put the desk support back into operation after it
has been repaired.
Immediately take the desk support out of operation if the safety
devices (e.g. up/down switch) are not working properly.
Only operate the desk support in a commercial environment.
Do not use the desk support on an uneven standing surface. It
could tip over.
11