Konica Minolta bizhub C3110 Service Launch Manual page 55

Product Name: TONER (Black)
3. HAZARDS IDENTIFICATION
Emergency Overview:
Classification:
Most Important Hazards and Effects of the Products
Ingestion Effect:
Inhalation Effect:
Eye Effect:
Skin Effect:
Chronic Effects:
Environment Hazards: No data are available on the adverse effects of this product on the environment.
Specific Hazards:
4. FIRST-AID MEASURES
Ingestion: Wash out mouth with water. Drink one or two glasses of water. If symptoms occur, get medical
attention.
Inhalation: Move victim to fresh air immediately. If symptoms occur, get medical attention.
Eye Contact: Immediately flush eyes with plenty of water for 15 minutes. If symptoms occur, get medical
attention.
Skin Contact: Wash with water and mild soap.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media: CO2, water spray, foam and dry chemical
Extinguishing Media to Avoid: Full water jet
Fire and Explosion Hazards: If dispersed in air, like most finely divided organic powders, may form an explosive
Protection of Firefighters:
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions:
Environmental Precautions: None
Methods for Cleaning Up: Wear personal protective equipment(See Section 8). Vacuum or sweep material
MATERIAL SAFETY DATA SHEET
Black powder (mean dia. is 5-10um by volume ).
Almost oderless.
Not classified as dangerous. (1999/45/EC)
None currently known.
None currently known. Minimal respiratory tract irritation may occur as with exposure
to large amount of any non-toxic dust.
None currently known.
None currently known.
Prolonged inhalation of excessive dusts may cause lung damage. Use of this
product, as intended, does not result in inhalation of excessive dust.
Dust explosion(like most finely divided organic powders)
mixture.
Use self-contained breathing apparatus(SCBA).
None
and place in a bag and hold for waste disposal. Use vacuum equipped with High
Efficiency Particulate Air(HEPA) filter. Vacuum should be electrically bonded and
grounded to dispel static electricity. To avoid dust generation, do not sweep dry.
MSDS No.:PRT-2543
Prepared Date:13-Nov-2008
Revised Date: 31-Mar-2014
Page:2/6