Konica Minolta bizhub C3110 Service Launch Manual page 29

Program Release Information
CSES ID-No. DLBT1408854EN00
Title: KONICA MINOLTA Universal Print Driver Ver.2 Maintenance Release 5 (PS/ Version 2.50.0.0)
7. If you open "Properties" when using Universal Print Driver under the following conditions, do not switch the
application until the Device Selector is opened.
When the following sympton1 occurs, please close the Device Selector.
Condition:
32bit Application is installed on Windows 64bit OS.
Procedure/ Symptom
1) Open Print> Properties of 32bit application (ex. applicationA). After that, if you switch to another application (ex.
applicationB), switched application (applicationB) does not respond.
2) If you close "Print Dialog" of 32bit application (applicationA) under the condition1, 32bit application
(applicationA) does not respond.
8. In Dynamic Mode, even if change the port from the Device Selector screen, the port may not be changed when
opening Printer properties. (Specification for OS)
9. In Dynamic Mode, if change the port from Printer properties, the job may not be printed to correct port.
Countermeasure
Please change the port from the Device Selector screen.
Occurring PDL
- PS Driver
10. When add the printer Driver using Point&Print and it is connected via IPV6, there is a restriction as below.
When change the Printing Preferences, it is returned to the default setting after printing.
Occurring PDL
- PS Driver
11. On Microsoft Publisher 2007, there is a restriction as below.
After installing Universal Print Driver, if you never use it and print the job from Dynamic Mode, Printing Preferences
is not reflected in the printing result.
Countermeasure
1) Close Microsofot Publisher 2007.
2) Open Printing Preferences of Universal Print Driver from "Printer and Faxes".
3) Select the Device from the Device Selector screen and click "OK" button in displayed Printing Preferences
screen.
5/10
2014/05/30
27