Konica Minolta bizhub C3110 Service Launch Manual page 20

Program Release Information
CSES ID-No. DLBT1408853EN00
Title: KONICA MINOLTA Universal Print Driver Ver.2 Maintenance Release 5 (PCL/Version 2.50.0.0)
11. In Citrix Presentation Server 4.5/Citrix XenApp 5.0, there are restrictions as below.
- Dynamic Mode is not supported. Please use Traditional Mode.
- When installing Universal Print Driver to Client PC from Traditional Mode, if Admin Privilege User opens "Printing
Preferences" or "Properties" of AutoCreate Driver, the Device Selector screen is started. (Specification for
Presentation Server 4.5/ Citrix XenApp 5.0)
It is possible to print the job if select output port and child driver from started Device Selector screen.
If any user except Admin Privilege user performs this, this symptom does not occur.
- If perform the following operation, cannot close the Properties screen of Citrix Universal Print Driver. (Specification
for Universal Print Driver of Citrix)
1) Create the printer icon from Traditional Mode on the Client PC.
2) Connect to the Citrix.
3) When open the Properties of AutoCreate Printer icon from "Printer and Faxes", the Properties of Citrix
Universal Print Driver is displayed.
4) If click "Local Printer Settings" button, the Properties of KONICA MINOLTA Universal Print Driver is displayed.
Click "OK".
5) Even if click OK or Cancel from the Properties of Citrix Universal Print Driver, the Properties screen is not
closed.
If open the Properties from the application, this symptom does not occur.
Countermeasure
- Please open the Properties setting from the printer icon that created from Traditional Mode of Client PC and
perform setting before connecting to the Citrix.
12. When using Dynamic Mode, there is a restriction as below.
When changing the Device from the Device Selector screen, Printing Preferences setting may not go back to the
default.
Countermeasure
Please select "Default Setting" from the Favorite Setting and set Printing Preferences to the Default.
Occurring PDL
PCL Driver
13. Any user except the user installed Universal Print Driver or Admin Privilege User cannot open the Device Selector
screen.
When open the Device Selector screen, please use "Run as administrator".
Occurring OS
- WindowsVista
- Windows Server 2008
14. In CorelDRAW Graphics Suite, if select "Collate", it does not work.
Countermeasure
1) Select "File"> "Print".
2) Click "References" button and select "Printer Preferences" of Driver.
3) Select "Collate" of "Printer Preferences".
18
6/10
2014/05/30