Konica Minolta bizhub C3110 Service Launch Manual page 22

Program Release Information
CSES ID-No. DLBT1408853EN00
Title: KONICA MINOLTA Universal Print Driver Ver.2 Maintenance Release 5 (PCL/Version 2.50.0.0)
20. There is following restrictions under Point and Print environment when the added watermark which is not shared and
it is set as default on the Server.
- The watermark below the added watermark on the Server is not reflected on client.
21. When the Spin button is clicked continuously, the Spin button may not be displayed.
22. If the printer icon is created by Traditional Mode using "Network Search" under the following situation, the Child
driver is not selected correctly. (Restriction of OS)
- The printer icon of MFP/Printer with the same IP address and the same Device Name (Device Name in Machine
Setting) exist on the network is created again after create the printer icon.
23. The following symptom occurs under Point and Print environment. (Restriction of OS)
"It could not access to the printer" or "Operation could not be completed." is displayed and Property of printer icon
on client can not be opened under the following situation.
- OS: Windows 7
- UPD Version: v1.0.0.0/1.2.0.0/1.3.0.0/1.10.1.0/1.11.1.0
And updating to this version from above version.
- ":" + "character of A to F" is used for printer icon name.
24. Admin Privilege User except Built-in administrator may not be able to open the Device Selector screen on Server
2012.
If the Device Selector screen can not be opened, please apply the following procedure.
1) Open the Print server properties.
2) Click "Add" button in Security Tab and add Admin Privilege User.
*If "Add" button is grayed out, please select Security Tab after click "Change Form settings" button in Forms
Tab.
3) Enable "Allow" of the followings for the added Admin Privilege User.
- Manage Printers
- View Server
- Manage Server
25. When you select "Share the Printer" of [Add this Printer to my Printers folder] of Device Selector and try to add the
printer icon on Windows Vista, "It fails to share the printer" is displayed and the icon cannot be added.
Countermeasure
right-click on
Please the printer icon and select "Run as administrator" to open Device Selector.
4. Important Notice
1. The reproduction of bizhub20 /20P picture is prohibited.
20
8/10
2014/05/30