Konica Minolta bizhub C3110 Service Launch Manual page 33

Program Release Information
CSES ID-No. DLBT1408854EN00
Title: KONICA MINOLTA Universal Print Driver Ver.2 Maintenance Release 5 (PS/ Version 2.50.0.0)
4. Important Notice
1. The reproduction of bizhub20 /20P picture is prohibited.
5. How to install/uninstall program
When a Universal Printer Driver which is older than this version (v2.50.0.0) is installed in your PC, if this version
(v2.50.0.0) is updated by Add install, the Printing preferences and the Printer properties will not be displayed
correctly. If this version (v2.50.0.0) is installed by the installer (Setup.exe), the following message will be
displayed and this version (v2.50.0.0) cannot be installed.
"The printer driver is not a target for update."
Please be sure to install this version (v2.50.0.0) after deleting the older version.
5.1 How to install
a) When using Installer,
If your PC is 32-bit environment, please use "UPDSetup.exe". If your PC is 62-bit environment, please use
"UPDSetup64.exe". And follow the onscreen wizard to do installation.
* In the following environment, cannot use the Installer. Please refer to c) or d).
- Microsoft Cluster Server
- Citrix Presentation Server 4.5
- Citrix XenApp 5.0/6.0
b) When install manually
Please perform installation using Add Printer Wizard in Windows.
c) When installing Universal Print Driver in Microsoft Cluster Server.
c-1) In the node that creates Cluster, access to the printer folder of Virtual Server from Active Node.
c-2) Install Universal Print Driver using add Printer Wizard.
* About the destination port, please specify the optional port.
* Please select "Do not share this printer".
* In Add Printer Wizard, cannot print the test page.
c-3) Open Properties of Universal Print Driver on the printer folder and display the Device Selector screen.
c-4) Select the device and create the printer icon from Traditional Mode.
* Using Dynamic Mode is not supported in the Cluster Server.
c-5) Close Properties of Universal Print Driver from "Cancel" button.
c-6) When using Universal Print Driver in Point and Print, set the printer icon that created at C-4) to "share this
printer".
d) When installing Universal Print Driver to Citrix Presentation Server 4.5, Citrix XenApp 5.0/6.0
d-1) Please perform installation using Add Printer Wizard in Windows.
Installation Note
When performing installation using Add Printer Wizard in Windows, "Do you want to print a test page?" is displayed while
installing Universal Print Driver. Output port is not decided at this point. Therefore, if select "Yes", the test page is not
printed out.
9/10
2014/05/30
31