Konica Minolta bizhub C3110 Service Launch Manual page 19

Program Release Information
CSES ID-No. DLBT1408853EN00
Title: KONICA MINOLTA Universal Print Driver Ver.2 Maintenance Release 5 (PCL/Version 2.50.0.0)
5. If you print the job from Microsoft Excel when selecting the destination printer on the Device Selector and using it,
paper size and printing direction that were saved in Excel file may not be reflected.
Countermeasure
Please select Excel file >Print >Properties and perform setting again.
6. If you open "Properties" when using the Universal Print Driver under the following conditions, do not switch the
application until the Device Selector is opened.
When the following sympton1 occurs, please close the Device Selector.
Condition:
32bit Application is installed on Windows 64bit OS.
Procedure/ Symptom
1) Open Print> Properties of 32bit application (ex. applicationA). After that, if you switch to another application (ex.
applicationB), switched application (applicationB) does not respond.
2) If you close "Print Dialog" of 32bit application (applicationA) under the condition1, 32bit application
(applicationA) does not respond.
7. Incorrect driver may be selected when trying to print on the same MFP with changing the driver like example below.
Occurring case
- The firmware for the MFP updated.
- When you selected the driver manually, and the driver manually selected was the different one from the driver
listed on the network search.
Occurring PDL
PCL Driver
Countermeasure
User who operates the MFP performs Logoff, and login to the MFP again.
8. When printing the file has a large image from KONICA MINOLTA 20/20P PCL Child Driver, the Black line appears on
the image.
Countermeasure
Use KONICA MINOLTA 20/20P PS Driver or KONICA MINOLTA 20/20P PCL Driver of product.
9. In Dynamic Mode, even if change the port from the Device Selector screen, the port may not be changed when
opening Printer properties. (Specification for OS)
10. On Microsoft Publisher 2007, there is a restriction as below.
After installing Universal Print Driver, if you never use it and print the job from Dynamic Mode, Printing Preferences
is not reflected in the printing result.
Countermeasure
1) Close Microsofot Publisher 2007.
2) Open Printing Preferences of Universal Print Driver from "Printer and Faxes".
3) Select the Device from the Device Selector screen and click "OK" button in displayed Printing Preferences
screen.
5/10
2014/05/30
17