Contents Of The Software Package; Pc Requirements - Festo SPC200 Manual

Contents and general instructions

Contents of the software package

PC requirements

Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d
Commissioning for pneumatic axes and controllers of the
SPC200 is described via I/Os. Information on electric axes
and field bus modules can be found in the specific manuals
(see section Documentation on the Smart Positioning
Controller SPC200").
You can access the online help any time in WinPISA by pres
sing function key F1. With key combination CTRL + F1 you can
access directly a context−related help page, providing this is
available. You will also find a Help" button in many dialogue
windows.
The software package consists of:
one CD ROM,
the licence agreement,
this manual.
The following are required for commissioning:
Pentium−compatible PC with:
Operating system as from Windows 98,
RAM corresponding to the recommendations for the
Windows version,
30MB of available hard−disk space,
CD−ROM drive,
a free serial interface to connect the positioning system
(for online mode only).
XIX