Festo SPC200 Manual page 68

1. Installation and general user information
Commands in menu
[Window]
1−28
Working with windows
Different windows are displayed in the working area of the
WinPISA program window. You can move these, change their
size, reduce them to symbols, etc.
The menu [Window] contains commands which affect the
windows in the working area.
Command
[Cascade]
[Tile horizontally]
[Tile vertically]
[Arrange Icons]
[Close all]
[All to icons]
[Restore all]
[Editor]
[Graphic]
[Debug]
[Message]
[Observe]
[1 ...]
[2 ...]
etc.
Function
Arranges all open windows in the WinPISA
working area in a cascade.
Arranges all open windows in the WinPISA
working area next to each other.
Arranges all open windows in the WinPISA
working area one below the other.
Arranges the minimized windows (icons) in
the WinPISA working area.
Closes all windows of the type selected in
the overlapping menu.
Minimizes all windows of the type selected
in the overlapping menu.
Restores all windows of the type selected in
the overlapping menu to their original size.
Applies the [Close all], [All to icons] or
[Restore all] command to the appropriate
windows.
All windows in WinPISA will be listed here
and can be activated.
Festo P.BE−SPC200−WIN−PISA−CD−EN en 0901d