PRINTING SECTION
3.10.2 FEED ENCODER, FEED START SENSOR, FEED ENCODER
HARNESS, FEED ENCODER CLEANING BRUSH
[B]
[A]
C262R097.WMF
• Drum unit (
3.8.1)
• Rear cover (
3.2.2)
• Open out the ACU - ECU assembly (
3.5.1)
1. Disconnect the connector [A] from the rear of the machine (1 clamp [B]).
[C]
[D]
C262R098.WMF
[C]: Knob cover (
x 1)
2. Turn the knob [C] until the flat part of the cylinder [D] is in the position shown.
SM
3-107
C262/C265