Table of Contents
Advertisement
PAPER DELIVERY
6.10 PAPER DELIVERY
6.10.1 OVERVIEW
[B]
[A]
[B]
[C]
[D]
C262D109.WMF
[E]
The paper delivery unit consists of three rubber belts [A] and the vacuum fan motor
[D]. The rubber belts are driven by the main motor, and they feed the paper, which
is held against the belts by suction generated by the vacuum fan motor.
The paper pick-off plate [E] is located close to the pressure cylinder, in order to
prevent the paper from being wrapped around the pressure cylinder or entering
under the delivery unit. But, if the paper is firmly stuck to the pressure cylinder, the
plate moves away to prevent damage.
The paper guide wings [B] help to feed out the paper to the delivery table. A dc
motor (the wing guide motor) changes the angle of the wings automatically. There
are two settings, and the setting used depends on the paper type selected at the
operation panel.
The exit sensor (not shown) detects paper misfeeds.
The exit pawl [C] prevents paper from wrapping around the drum. Three air knife
fans help to separate the paper from the drum.
C262/C265
6-112
SM
Advertisement
Table of Contents
