Accessory Check; Installation Procedure; Ieee 1284 Parallel Board Type 1 (Option) - Ricoh LDD280 Service Manual

INSTALLATION PROCEDURE

1.2.8 IEEE 1284 PARALLEL BOARD TYPE 1 (OPTION)

Accessory Check

Check the quantity and condition of the accessories in the box against this list:
Description Quantity
1. Parallel board................................................................................. 1
2. Parallel cable ................................................................................. 1
Installation Procedure
You can only install one of these two cards, because only one slot (slot A) is
available for these options:
• IEEE 802.11b I/F Unit Type 1
• IEEE 1284 Parallel Board Type 1
If a different card is installed in slot A, you must remove it before you install the
IEEE 1284 Parallel Board Type 1.
[A]
[B]
[C]
C262I031.WMFF
1. Turn the machine off.
2. Remove the slot cover [A] ( x 2).
3. Install the IEEE1284 board [B] into slot A and secure it with the screws ( x 2).
4. Attach the parallel cable [C].
5. Turn the machine on and print a configuration page to make sure that the
machine can see the "IEEE 1284":
User Tools> Online Printer Features> List/Test Print> Configuration Page
C262/C265 1-32 SM