MAIN DRIVE AND IMAGE UP/DOWN SHIFTING DRIVE SECTION
7. While aligning and holding the pressure cylinder horizontally as shown, set the
main drive unit so that the convex points of the pressure cylinder's drive disk
[E] meet the concave points of the pressure cylinder drive transmission disk [F]
(made of white plastic).
NOTE: Hold the drum drive disk, image shifting arm, pressure cylinder drive
disk, and scissors gear in their home positions as explained in steps 1,
2 and 3.
[G]
8. Secure the main drive unit [G] on the machine rear frame (
SM
[F]
C262R133.WMF
C262R134.WMF
3-131
[E]
x 6).
C262/C265