Table of Contents
Advertisement
SERVICE PROGRAM MODE
Notes
1: 3-4 (PM Parts Replacement Record)
After all PM parts are replaced, use the SP for each replaced part and push the
'Replace' button, then push 'Yes'. The date, and the print and master counters at
the time of replacement will be stored in the machine.
The parts for which this information can be recorded are:
Cloth screen, Paper clamper, Pick-up roller, Paper feed roller, Friction pad A/B,
Feed Encoder Brush Bracket.
NOTE: 1) Make sure to push the 'Replace' button then 'Yes' each time you replace
a part. If you do not do this, the information is not recorded correctly.
2) Use this information for checking the endurance of PM parts
SM
5-27
C262/C265
Advertisement
Table of Contents
