Table of Contents
Advertisement
M22M Camera Manual Part 1
1.4.5 Resetting the Camera to Factory Defaults
All settings of the MOBOTIX camera can be reset permanently to the factory default
settings. This makes sense if you have, for example, obtained a camera without
any information or you would like to reset all settings after testing the camera. In
order to perform this procedure, you need to have access to the administration
area of the camera (Admin rights). Open Admin Menu > Reset ... to reset the
camera to factory defaults.
Note: In contrast to the method described in section 3.6, Starting the Camera
Using the Factory IP Address ,
when resetting the camera to factory defaults. Likewise,
password will be
reset.
1.4.6 Deactivating Event Control for Web Applications
In its factory state, the camera's event control and video motion detection features
are enabled. Hence, the camera stores images as soon as the video motion win-
dow (dotted frame in the image center) detects movements. In order to deactivate
event control as a whole, open Setup Menu > General Event Settings and deacti-
vate the Arming switch. This will also remove the video motion window (dotted
frame) from the live image.
1.4.7 Deactivating Text and Logo Options
In its factory state, the MOBOTIX camera displays text information at the top and
bottom of the live image. Also, the camera displays a logo on the top right corner
of the live image. You can deactivate the status text at the bottom and the text at
the top left corner of the live image by setting Text Display in the Setup Menu >
Text & Display Settings dialog to Date & time . Setting Text Display to Off will deac-
tivate all displayed text in the live image. In order to hide the logo in the live image,
open Admin Menu > Logo Profiles and set Logo Display to Disable .
1.4.8 Deactivating the Daily Reboot of the Camera
In its factory state, the MOBOTIX camera will automatically reboot every morning at
3:36 am. In very rare cases, external influences (e.g. radiation in high locations) can
lead to camera malfunctions. The automatic reboot will refresh the camera's mem-
ory and will ensure proper operation without requiring any interaction on the part
of the user.
Open Admin Menu > Time Tasks and deactivate or delete the Reboot camera
task. This will prevent the camera from rebooting automatically.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 31.1.2007
all users (except the admin user) will be deleted
the admin user's
15
/56
The configuration can also
be reset partially
The dotted rectangle in
the live image will be
removed when
deactivating Arming
Text and logos can be
deactivated or customized
to your liking
Deactivating the camera
reboot
Advertisement
Table of Contents
