Power Supply Of The Mobotix M22M - Mobotix M22M Manual

20
/56
The M22M supports the
Power-over-Ethernet
standard IEEE 802.3af
M22M Camera Manual Part 1

2.4 Power Supply of the MOBOTIX M22M

In order to reduce the amount of cabling, you should always use the Ethernet cable
(Power over Ethernet) to supply power to the camera.
For smaller installations, the MOBOTIX Network Power Adapter MX-NPA-3-RJ and
the external power unit MX-SNT-E01-30-RJ may suffice; larger installations would
benefit from one or more MOBOTIX Network Power Racks that are available for
supplying power to 4, 8 or 20 cameras ( MX-NPR-4 , 8 or 20 ). Open
shop.mobotix.com in the Accessories section to find more information on
these and other items.
Network Power Adapter
MX-NPA-3-RJ
Since the MOBOTIX M22M supports
also use PoE switches for supplying power.
If you are using Power over Ethernet components (IEEE 802.3af)
supplying power to the MOBOTIX M22M, these components have to
provide PoE class 0
device). Although the M22M only uses 3 Watts and does not require
heating even at very low temperatures, this will ensure that devices
attached to the USB port of the camera will be properly supplied.
Section 3.3, Connecting the Camera , contains more information on the possible
combinations of connections and power supply options.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Network Power Box
MX-NPR-4
Power over Ethernet (IEEE
Note
(12.95 Watts max. power consumption of attached
www.mobotix.com • sales@mobotix.com • 31.1.2007
Network Power Rack
MX-NPR-20
802.3af), you can
for