Table of Contents
Advertisement
M22M Camera Manual Part 1
After first booting the new MOBOTIX camera or after resetting to fac-
tory defaults, accessing the Administration menu in the browser
(Admin Menu button) will automatically start the Quick Installation
wizard. This is where you configure the most important camera
parameters in a step-by-step manner. If you have completed the Quick
Installation wizard at least once, the standard Administration menu will
open.
The configuration follows these five general steps:
a) Establish the first connection (via the network).
b) Set the parameters for the desired connection type (Quick Installation).
c) Set the event control (events, actions and messages); see chapter 7, Events,
Actions and Messages , in the Software Manual .
d) Set the storage parameters (FTP or external ring buffer storage).
e) Store the configuration in the camera's permanent storage (flash) for reboot-
ing.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 31.1.2007
Note
33
/56
Always use Quick
Installation for initial
configuration
Advertisement
Table of Contents
