Mobotix M22M Manual page 11

M22M Camera Manual Part 1
Power over Ethernet Integrated
Power is supplied via the network cabling using either devices that supply PoE
according to IEEE 802.3af, the MOBOTIX Network Power Adapter or the Network
Power Racks (up to 20 cameras). Since the camera's plastic housing insulates well
and does not fog up, no additional heating or fans are necessary. This is why
MOBOTIX cameras have low power requirements (3 Watts) and can be operated
every day of the year indoors as well as outdoors and why PoE can be used for
supplying power—unlike in other cameras.
Weatherproof
MOBOTIX cameras are certified according to IP65 and are designed for outdoor as
well as indoor usage. As the cameras do not have any moving parts, they are
extremely robust and resistant against heat or cold (-30°F to +60°C; -22°F to +
140°F).
Secure and Flexible Installation Using the SecureFlex Mount
The SecureFlex wall mount provides easy mounting of the MOBOTIX M22M to a
wall or ceiling and also allows positioning the camera into virtually any direction,
while the concealed cabling enhances the visual impression of the installation. The
mount completely covers wall outlets and allows using a defined network end
point, thus facilitating the installation.
Logos, Animated or Freestyle
The Logo generator of the MOBOTIX camera allows integrating different banners
and graphics into the current camera images—with optional scheduler control.
MOBOTIX cameras are the only cameras supporting animated and transparent
graphics.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 31.1.2007
9
/56
No heating—PoE even in
the winter
Covers RJ45 wall outlets
and conceals the cabling
Logo generator integrated