Mobotix M22M Manual page 41

M22M Camera Manual Part 1
Make sure that no other network device uses the camera's IP address:
• Open a command shell (Windows) or a console (Linux) and enter the follow-
ing command:
ping <factory IP address>
If you receive an answer from another network device although the camera is not
connected, you will have to remove that device until you have reset the MOBOTIX
camera to a free IP address. We recommend using the Quick Installation wizard for
this task.
If your computer does not use an IP address in the
10.0.0.0 network (e.g. a 192.168.x.x or 172.x.x.x
network), you should add a second IP address to the
network configuration of your computer or set a new
IP address:
Windows 2000/XP:
(1) Open the Network Connections and open the
Properties of LAN Connection.
(2) Double-click Internet Protocol (TCP/IP).
(3) Click on the Alternative Configuration tab.
(4) Enter an IP address (e.g. 10.1.0.11) in the class A
network (10.x.x.x) that is unique in your network
and that is not the same as the camera's IP
address.
(5) Close all dialogs by clicking on OK.
Linux/UNIX:
(1) Open a console as root user and enter the follow-
ing command:
ifconfig eth0:1 10.1.0.11
The computer now has the additional IP address 10.1.0.11, allowing it to access
the camera with its factory IP address in the 10.x.x.x network (10.1.0.99 in
this example).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com • 31.1.2007
39
/56
The factory IP address is
printed on the sticker on
the camera housing
Example: 10.1.0.99