Connecting The Camera; Power Supply Using Mobotix Products (Network Power Adapter) - Mobotix M22M Manual

36
/56
The Network Power
Adapter replaces the
crossover cable when
directly connecting to a
computer
The NPA can eliminate a
crossover cable that may
be hard to obtain
M22M Camera Manual Part 1

3.3 Connecting the Camera

Make sure that you only use switches or routers that support the
Ethernet interface of the camera and check the LED activity of the corresponding
port of the switch or router. For additional information on this topic, see section 4.11,
Operating Many Cameras , in the Software Manual .

3.3.1 Power Supply Using MOBOTIX Products (Network Power Adapter)

1) Connect the Camera connector of the Network Power Adapter (NPA) to the
NET connector of the camera.
2a) Connecting to an Ethernet switch or router:
• Connect the LAN/Power connector of the NPA to an Ethernet connector of
the switch/router or the Ethernet wall outlet.
• Plug the RJ45 connector of the external power unit into the PC/Power
connector of the NPA.
2b) Connecting directly to a computer:
• Connect the PC/Power connector of the NPA to the Ethernet port of the
computer.
• Plug the RJ45 connector of the external power unit into the LAN/Power
connector of the NPA.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Network Power
Adapter
Network Power
Adapter
www.mobotix.com • sales@mobotix.com • 31.1.2007
10/100 Mbps