Socket Bluetooth iPAQ User Manual page 88

When the scanner is connected, the main screen of SocketScan will
report the scanner's battery level.
8. Send SocketScan to the background. In the main screen of SocketScan,
select Options | Send to background.
9. The main menu of the smartphone will appear. SocketScan will continue
running in the background, maintaining the connection to the Bluetooth
CHS.
STEP 5: O Y
PEN
1. Start the application that you want to receive the data (e.g., Notes). Make
sure a document or spreadsheet is open.
2. Make sure the application is in Number Mode. The status bar near the top
of the screen will display Abc if it is in Alpha Mode, and 123 if it is in
Number Mode. To change the mode, press the text entry button and select
Number mode.
3. Place the cursor where you want data from the next scan to go.
STEP 6: S D
CAN
1. Press the trigger button and scan the barcode.
When data is read and transmitted to the smartphone, the scanner will
beep once, the LED will flash green, and the beam will turn off.
If the Scanner fails to read data within a few seconds, the scanner beam
will turn off, and you must try again.
2. After a successful scan, data should appear in your document. The default
"CR" (carriage return) suffix will advance the cursor to the next line,
ready for the next scan.
88
A
OUR PPLICATION
Y A
ATA INTO OUR PPLICATION