Socket Bluetooth iPAQ User Manual page 29

• A manual connection will also be required if the scanner is not powered
back on or does not return back in connection range within 3 minutes
after a disconnection.
• A connection remains when the smartphone device is in suspend mode.
Note: By default, CS Auto Power off mode is enabled. This mode must be disabled
for automatic reconnections.
D
ISCONNECTING
To disconnect, click on the SocketScan icon. In the menu, click Disconnect
CS. The scanner will beep 2 times to disconnect the website.
Turning off the Bluetooth CHS
To turn off the Bluetooth CHS, press and hold the power button for at least 3
seconds, until the Bluetooth CHS beeps twice (high-low) and the blue LED
turns off.
This beep pattern is for the Bluetooth CHS v2.
CHAPTER 3: SETUP FOR WINDOWS XP, VISTA, AND 7 29