Setup For Windows Mobile - Socket Bluetooth iPAQ User Manual

5 | S
This chapter explains how to install and use the Bluetooth Cordless Hand
Scanner (Bluetooth CHS) with non-SoMo device running Windows Mobile or
Windows CE.
Note: Before you begin the instructions in this chapter, please charge and
install the battery, as explained in Chapter 2, "Hardware Preparation."
C O
ONNECTION PTIONS
For Windows-based computers, the Socket Bluetooth CHS offers three
different connection options to fit different work environments.
Scenario
Scenario 1: Single user
with one scanner per
PDA, no roaming.
Scenario 2: Enterprise
deployment with one
scanner per PDA, no
roaming.
Scenario 3: Enterprise
deployment with
scanner(s) roaming
between different PDAs.
IMPORTANT! REMEMBER THE NUMBER OF THE SCENARIO YOU WANT
TO SET UP THE SOFTWARE FOR!
CHAPTER 5: SETUP FOR WINDOWS MOBILE
W
ETUP FOR
How Bluetooth
Connection Initiates
Computer initiates the
connection through
Bluetooth software.
Scanner initiates the
connection automatically
when it is powered on.
(ActivePairing with
Permanent Pair)
Scanner initiates the
connection by reading a
special barcode.
(ActivePairing)
M
INDOWS OBILE
Pros/Cons
Easiest to configure
but requires user to
start connection
through software.
More complex to
configure but
easiest connection
method.
Easy to connect but
requires barcode
generating
software.
Compatible
Hardware/
Any version
of Bluetooth
CHS
Part number
(labeled in
battery
compartment)
8550-00037
or later
51