Socket Bluetooth iPAQ User Manual page 39

STEP 4: T
URN ON THE
Press and hold the small power button for 3 seconds, until the LED
turns blue and the scanner beeps twice (low - high).
The LED should blink blue once every second to show that the Bluetooth
radio is on but not connected.
The following Bluetooth mode sequence is for the Bluetooth CHS v2.
Time after turning on scanner
0-5 minutes
5-20 minutes
20 minutes
STEP 5: P
REPARE THE
Follow the instructions for the scenario you want to set up for.
SCENARIO 1:
1. Tap on the SocketScan icon
menu, tap Connect CS.
Note: The Connect CS option appears only after cordless scanner support is
enabled.
2. If the Bluetooth radio of your device is turned off, Connect!Agent will ask
if you want to turn it on. Tap Yes.
CHAPTER 4: SETUP FOR THE SOMO 650
Bluetooth CHS
Bluetooth mode
Discoverable and connectable
Connectable
Scanner automatically powers off
C
ONNECTION
at the bottom of the screen. In the pop-up
39