Socket Bluetooth iPAQ User Manual page 64

4. Tap on the CS HW tab. Enter the following settings:
• Good Read Indicator: Select how you would like the Bluetooth CHS
to indicate that it has successfully read data.
• Battery Level: When the Bluetooth CHS is connected, a progress bar
displays this advanced feature.
• Disable Auto Power Off mode:
3
CAUTION: Selecting this option will disable the Auto Power Off
mode and can result in complete discharge of the Bluetooth
CHS batteries. Use with caution.
• Advanced: When the scanner is connected, the Advanced button
appears. If desired, tap to configure advanced settings (configurable only
with the Bluetooth CHS v2).
−
Good Read Indicator from the host: Select how you would like
the Bluetooth CHS to indicate that the mobile device has received
the scanned barcode data.
−
Trigger lock out: Select how long you would like the Bluetooth
CHS to disable the trigger until data from the previously scanned
barcode reaches the mobile device.
−
Permanent Pair: Please refer to the ActivePairing section on the
next page for instructions.
−
Tap OK.
5. Tap ok.
64