Socket Bluetooth iPAQ User Manual page 74

S S
CANNER ETTINGS
1. Make sure the main screen of SocketScan reports that the Bluetooth CHS
is enabled. Tap Configure.
Note: You can configure prefix/suffixes whether or not the
Bluetooth CHS is connected to your device.
2. The Configure screen will appear. Enter any settings, as desired:
• Trigger Mode: Select Local to directly trigger the scanner whenever
you press the trigger button. Select Remote to have the scanner verify
a connection to your PDA before it activates the scanner beam.
• Read Indicator: Select how you would like the Bluetooth CHS to
indicate that data was successfully decoded and transmitted to the
PDA.
• Auto reconnect to last device: Check to have your PDA
automatically connect to the last Bluetooth CHS unit it connected to
whenever you tap Enabled in the main screen of SocketScan.
• Keep PDA alive for: Select how long you would like the PDA to stay
alive after the last scan. This feature allows you to scan data for several
hours without touching the PDA, as long as you scan at least once
before the time limit passes. Select System Default to keep your PDA
alive for the amount of time set as default in the PDA's system
settings.
74