Socket Bluetooth iPAQ User Manual page 41

6. After the devices connect, the Bluetooth CHS will beep
once. The SocketScan icon at the bottom of the Today
screen will change into a scanner icon to indicate the
connection.
Note: Connect!Agent will save data to automate future connections
to your Bluetooth CHS. To change the favorite scanner, use the
Connect!Agent utility (see instructions at the end of this chapter)
SCENARIO 2:
After the SoMo connects to the scanner, you can set up a Permanent Pair.
1. Complete the steps described above for Scenario 1.
2. While the scanner is connected to the computer, tap on the
SocketScan icon. In the menu, tap Settings.
3. In the CS HW tab, tap Advanced. Check the box Permanent Pair. Tap
OK. Tap ok to save.
Note: After you set up the Permanent Pair, future connections can be initiated
by simply powering on the scanner. SocketScan must be running on the SoMo.
CHAPTER 4: SETUP FOR THE SOMO 650 41