Socket Bluetooth iPAQ User Manual page 104

:
SYMPTOM When I try to install SocketScan, an error message says Access is denied.
POSSIBLE REASON
You tried to install SocketScan on a
Windows 7 computer while not logged
into an administrative account.
:
SYMPTOM While scanning, I turned off the Pocket PC, or my Pocket PC entered
suspend mode. Now my Pocket PC won't turn on again.
POSSIBLE REASONS
This is a known problem with the
WIDCOMM stack (built into HP h221X
iPAQ Pocket PCs with ROM version 1.00).
:
SYMPTOM My computer cannot find the Bluetooth Cordless Hand Scanner,
and/or I get an error message saying that there are connection problems.
POSSIBLE REASONS
You are too far from the
Hand Scanner.
Bluetooth
The Cordless Hand Scanner is not
turned on.
You have assigned another device as your
favorite or default Bluetooth serial device.
You are using an XP or Vista system, and you
did not start the Bluetooth software.
The Bluetooth radio of your mobile
computer is not turned on.
SYMPTOM: My Pocket PC shows an error message saying that there are insufficient
device resources.
POSSIBLE REASONS
Some HP iPAQ Pocket PCs are not compatible
Bluetooth
with the Cordless Hand Scanner.
104
SOLUTION
Abort the process. Log into an
administrative account and restart the
installation.
SOLUTION
Soft reset the Pocket PC by pressing the
reset button.
Bluetooth Cordless
SOLUTION
Move the devices closer together,
within a range of 10-15 meters.
Bluetooth
Turn on the
Scanner.
Remove any settings that assign
another device as your favorite
Bluetooth serial device.
Start the Bluetooth software.
Turn on the Bluetooth radio of your
mobile computer.
SOLUTION
The Bluetooth CHS will not work with
your Pocket PC at this time.
Cordless Hand