Page 5
The Data-Editing – Suffix – For SPP Mode command barcodes above only work with Revision B or later of the CHS 7Ci! They work with all Revisions of the CHS 7Di and 7DiRx. Power Button Double Press Key Combination — For HID Mode Only...
4 - 16 SE655 Decoded Linear Imaging Engine Bookland ISBN Format Parameter # F1h 40h If Bookland EAN is enabled, select one of the following formats for Bookland data: Bookland ISBN-10 - The digital scanner reports Bookland data starting with 978 in traditional 10-digit format with the •...
Page 13
Parameter Menus 4 - 17 Decode UPC/EAN Supplementals Parameter # 10h Supplementals are bar codes appended according to specific format conventions (e.g., UPC A+2, UPC E+2, EAN 13+2). The following options are available: If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus •...
Page 14
4 - 18 SE655 Decoded Linear Imaging Engine Decode UPC/EAN Supplementals (continued) Select the desired option by scanning one of the following bar codes. Decode UPC/EAN With Supplementals (01h) *Ignore UPC/EAN With Supplementals (00h) Autodiscriminate UPC/EAN Supplementals (02h) Enable 378/379 Supplemental Mode (04h) Enable 978/979 Supplemental Mode (05h)
Page 15
Parameter Menus 4 - 19 Decode UPC/EAN Supplementals (continued) Enable 977 Supplemental Mode (07h) Enable 414/419/434/439 Supplemental Mode (06h) Enable 491 Supplemental Mode (08h) Enable Smart Supplemental Mode (03h) Decode UPC/EAN Supplemental Redundancy Parameter # 50h With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a symbol without supplementals are decoded before transmission.
Page 16
4 - 20 SE655 Decoded Linear Imaging Engine UPC/EAN/JAN Supplemental AIM ID Format Parameter # F1h A0h Select an output format when reporting UPC/EAN/JAN bar codes with Supplementals with Transmit Code ID Character on page 63 set to AIM Code ID Character - transmit UPC/EAN with supplementals with separate AIM IDs but one transmission, i.e.: •...
Page 17
Parameter Menus 4 - 21 Transmit UPC-A Check Digit Parameter # 28h Scan the appropriate bar code below to transmit the symbol with or without the UPC-A check digit. *Transmit UPC-A Check Digit (01h) Do Not Transmit UPC-A Check Digit (00h) Transmit UPC-E Check Digit Parameter # 29h...
Page 18
4 - 22 SE655 Decoded Linear Imaging Engine Transmit UPC-E1 Check Digit Parameter # 2Ah Scan the appropriate bar code below to transmit the symbol with or without the UPC-E1 check digit. *Transmit UPC-E1 Check Digit (01h) Do Not Transmit UPC-E1 Check Digit (00h) UPC-A Preamble Parameter # 22h...
Page 19
Parameter Menus 4 - 23 UPC-E Preamble Parameter # 23h Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E symbol. Select one of the following options for transmitting UPC-E preamble to the host device: transmit system character only, transmit system character and country code (“0”...
Page 20
4 - 24 SE655 Decoded Linear Imaging Engine UPC-E1 Preamble Parameter # 24h Preamble characters (Country Code and System Character) can be transmitted as part of a UPC-E1 symbol. Select one of the following options for transmitting UPC-E1 preamble to the host device: transmit system character only, transmit system character and country code (“0”...
Parameter Menus 4 - 25 Convert UPC-E to UPC-A Parameter # 25h Enable this parameter to convert UPC-E (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit). Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E (zero suppressed) decoded data.
Page 22
4 - 26 SE655 Decoded Linear Imaging Engine EAN Zero Extend Parameter # 27h When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols. Disable this parameter to transmit EAN-8 symbols as is. Enable EAN Zero Extend (01h) *Disable EAN Zero Extend...
Page 23
Parameter Menus 4 - 27 UPC/EAN Security Level Parameter # 4Dh The SE655 offers four levels of decode security for UPC/EAN bar codes. Increasing levels of security are provided for decreasing levels of bar code quality. Select higher levels of security for decreasing levels of bar code quality. Increasing security decreases the scan engine’s aggressiveness, so choose only that level of security necessary for the application.
Page 24
4 - 28 SE655 Decoded Linear Imaging Engine UCC Coupon Extended Code Parameter # 55h The UCC Coupon Extended Code is an additional bar code adjacent to a UCC Coupon Code. To enable or disable UCC Coupon Extended Code, scan the appropriate bar code below. Enable UCC Coupon Extended Code (01h) Disable UCC Coupon Extended Code...
Page 25
Parameter Menus 4 - 29 Coupon Report Parameter # F1h DAh Traditional coupon symbols (old coupon symbols) are composed of two bar codes: UPC/EAN and Code128. A new coupon symbol is composed of a single Databar Expanded bar code. The new coupon format offers more options for purchase values (up to $999.99) and supports complex discount offers such as a second purchase requirement.
Parameter Menus 4 - 31 Code 128 Enable/Disable Code 128 Parameter # 08h To enable or disable Code 128, scan the appropriate bar code below. Enable Code 128 (01h) Disable Code 128 (00h) Set Lengths for Code 128 Parameter # L1 = D1h L2 = D2h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 28
4 - 32 SE655 Decoded Linear Imaging Engine Set Lengths for Code 128 (continued) Code 128 - One Discrete Length Code 128 - Two Discrete Lengths Code 128 - Length Within Range *Code 128 - Any Length CHS 7Ci, 7Di, 7DiRx Command Barcodes...
Page 29
Parameter Menus 4 - 33 Enable/Disable GS1-128 (formerly UCC/EAN-128) Parameter # 0Eh To enable or disable GS1-128, scan the appropriate bar code below. *Enable GS1-128 (01h) Disable GS1-128 (00h) Enable/Disable ISBT 128 Parameter # 54h To enable or disable ISBT 128, scan the appropriate bar code below. *Enable ISBT 128 (01h) Disable ISBT 128...
4 - 34 SE655 Decoded Linear Imaging Engine ISBT Concatenation Parameter # F1h 41h Select an option for concatenating pairs of ISBT code types: If you select Disable ISBT Concatenation, the digital scanner does not concatenate pairs of ISBT codes it •...
Parameter Menus 4 - 35 Check ISBT Table Parameter # F1h 42h The ISBT specification includes a table that lists several types of ISBT bar codes that are commonly used in pairs. If you set ISBT Concatenation to Enable, enable Check ISBT Table to concatenate only those pairs found in this table. Other types of ISBT codes are not concatenated.
Page 32
4 - 36 SE655 Decoded Linear Imaging Engine Code 39 Enable/Disable Code 39 Parameter # 00h To enable or disable Code 39, scan the appropriate bar code below. *Enable Code 39 (01h) Disable Code 39 (00h) Enable/Disable Trioptic Code 39 Parameter # 0Dh Trioptic Code 39 is a variant of Code 39 used in marking computer tape cartridges.
Page 33
Parameter Menus 4 - 37 Convert Code 39 to Code 32 (Italian Pharma Code) Parameter # 56h Code 32 is a variant of Code 39 used by the Italian pharmaceutical industry. Scan the appropriate bar code below to enable or disable converting Code 39 to Code 32. Code 39 must be enabled in order for this parameter to function.
Page 34
4 - 38 SE655 Decoded Linear Imaging Engine Set Lengths for Code 39 Parameter # L1 = 12h L2 = 13h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 35
Parameter Menus 4 - 39 Code 39 Check Digit Verification Parameter # 30h When this feature is enabled, the scan engine checks the integrity of all Code 39 symbols to verify that the data complies with specified check digit algorithm. Only those Code 39 symbols which include a modulo 43 check digit are decoded. Only enable this feature if your Code 39 symbols contain a module 43 check digit.
Page 36
4 - 40 SE655 Decoded Linear Imaging Engine Enable/Disable Code 39 Full ASCII Parameter # 11h Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable or disable Code 39 Full ASCII, scan the appropriate bar code below. Enable Code 39 Full ASCII (00h) Disable Code 39 Full ASCII...
Page 37
Parameter Menus 4 - 41 Code 93 Enable/Disable Code 93 Parameter # 09h To enable or disable Code 93, scan the appropriate bar code below. Enable Code 93 (01h) *Disable Code 93 (00h) Set Lengths for Code 93 Parameter # L1 = 1Ah L2 = 1Bh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 38
4 - 42 SE655 Decoded Linear Imaging Engine Set Lengths for Code 93 (continued) Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example, select Code 93 Two Discrete Lengths, then scan 0, 2, 1, 4, to limit the decoding to only Code 93 symbols containing 2 or 14 characters.
Page 39
Parameter Menus 4 - 43 Code 11 Enable/Disable Code 11 Parameter # 0Ah To enable or disable Code 11, scan the appropriate bar code below. Enable Code 11 (01h) Disable Code 11 (00h) Set Lengths for Code 11 Parameter # L1 = 1Ch L2 = 1Dh The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 40
4 - 44 SE655 Decoded Linear Imaging Engine Set Lengths for Code 11 (continued) Code 11 - One Discrete Length Code 11 - Two Discrete Lengths Code 11 - Length Within Range Code 11 - Any Length CHS 7Ci, 7Di, 7DiRx Command Barcodes...
Page 41
Parameter Menus 4 - 45 Code 11 Check Digit Verification Parameter # 34h This feature allows the scan engine to check the integrity of all Code 11 symbols to verify that the data complies with the specified check digit algorithm. This selects the check digit mechanism for the decoded Code 11 bar code. The options are to check for one check digit, check for two check digits, or disable the feature.
Page 42
4 - 46 SE655 Decoded Linear Imaging Engine Transmit Code 11 Check Digits Parameter # 2Fh This feature selects whether or not to transmit the Code 11 check digit(s). Transmit Code 11 Check Digit(s) (Enable) (01h) Do Not Transmit Code 11 Check Digit(s) (Disable) (00h) Code 11 Check Digit Verification must be enabled for this parameter to function.
Parameter Menus 4 - 47 Interleaved 2 of 5 Enable/Disable Interleaved 2 of 5 Parameter # 06h To enable or disable Interleaved 2 of 5, scan the appropriate bar code below. *Enable Interleaved 2 of 5 (01h) Disable Interleaved 2 of 5 (00h) Set Lengths for Interleaved 2 of 5 Parameter # L1 = 16h L2 = 17h...
Page 44
4 - 48 SE655 Decoded Linear Imaging Engine Set Lengths for Interleaved 2 of 5 (continued) Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For example, select I 2 of 5 Two Discrete Lengths, then scan 0, 6, 1, 4, to decode only I 2 of 5 symbols containing 6 or 14 characters. Numeric bar codes begin on page 64.
Page 45
Parameter Menus 4 - 49 I 2 of 5 Check Digit Verification Parameter # 31h When enabled, this parameter checks the integrity of an I 2 of 5 symbol to ensure it complies with a specified algorithm, either USS (Uniform Symbology Specification), or OPCC (Optical Product Code Council). *Disable (00h) USS Check Digit...
Page 46
4 - 50 SE655 Decoded Linear Imaging Engine Convert I 2 of 5 to EAN-13 Parameter # 52h This parameter converts a 14 character I 2 of 5 code into EAN-13, and transmits to the host as EAN-13. To accomplish this, I 2 of 5 must be enabled, one length must be set to 14, and the code must have a leading zero and a valid EAN-13 check digit.
Parameter Menus 4 - 51 Discrete 2 of 5 Enable/Disable Discrete 2 of 5 Parameter # 05h To enable or disable Discrete 2 of 5, scan the appropriate bar code below. Enable Discrete 2 of 5 (01h) *Disable Discrete 2 of 5 (00h) Set Lengths for Discrete 2 of 5 Parameter # L1 = 14h L2 = 15h...
Page 48
4 - 52 SE655 Decoded Linear Imaging Engine Set Lengths for Discrete 2 of 5 (continued) Length Within Range - Select this option to decode codes within a specified range. For example, to decode D 2 of 5 symbols containing between 4 and 12 characters, first scan D 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero).
Parameter Menus 4 - 53 Chinese 2 of 5 Enable/Disable Chinese 2 of 5 Parameter # F0h 98h To enable or disable Chinese 2 of 5, scan the appropriate bar code below. Enable Chinese 2 of 5 (01h) Disable Chinese 2 of 5 (00h) CHS 7Ci, 7Di, 7DiRx Command Barcodes...
4 - 54 SE655 Decoded Linear Imaging Engine Matrix 2 of 5 Enable/Disable Matrix 2 of 5 Parameter # F1h 6Ah To enable or disable Matrix 2 of 5, scan the appropriate bar code below. Enable Matrix 2 of 5 (01h) Disable Matrix 2 of 5 (00h)
Page 51
Parameter Menus 4 - 55 Set Lengths for Matrix 2 of 5 (continued) Matrix 2 of 5 - One Discrete Length Matrix 2 of 5 - Two Discrete Lengths Matrix 2 of 5 - Length Within Range Matrix 2 of 5 - Any Length Matrix 2 of 5 Redundancy Parameter # F1h 6Dh To enable or disable Matrix 2 of 5 redundancy, scan the appropriate bar code below.
Page 52
4 - 56 SE655 Decoded Linear Imaging Engine Matrix 2 of 5 Check Digit Parameter # F1h 6Eh The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar code below to transmit the bar code data with or without the Matrix 2 of 5 check digit.
Page 53
Parameter Menus 4 - 57 Inverse 1D Parameter # F1h 4Ah This parameter sets the 1D inverse decoder setting. Options are: - the digital scanner decodes regular 1D bar codes only. • Regular Only - the digital scanner decodes inverse 1D bar codes only. •...
4 - 58 SE655 Decoded Linear Imaging Engine Codabar Enable/Disable Codabar Parameter # 07h To enable or disable Codabar, scan the appropriate bar code below. Enable Codabar (01h) *Disable Codabar (00h) Set Lengths for Codabar Parameter # L1 = 18h L2 = 19h The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Page 55
Parameter Menus 4 - 59 Codabar (continued) Codabar - Two Discrete Lengths Length Within Range - Select this option to decode a code within a specified range. For example, to decode Codabar symbols containing between 4 and 12 characters, first scan Codabar Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always be preceded by a leading zero).
4 - 60 SE655 Decoded Linear Imaging Engine CLSI Editing Parameter # 36h When enabled, this parameter strips the start and stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar symbol. Symbol length does not include start and stop characters. NOTE Enable CLSI Editing (01h)
4 - 62 SE655 Decoded Linear Imaging Engine Set Lengths for MSI Parameter # L1 = 1Eh L2 = 1Fh The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and includes check digits.
Parameter Menus 4 - 63 MSI Check Digits Parameter # 32h These check digits at the end of the bar code verify the integrity of the data. At least one check digit is always required. Check digits are not automatically transmitted with the data. *One MSI Check Digit (00h) If two check digits are selected, also select an...
4 - 64 SE655 Decoded Linear Imaging Engine MSI Check Digit Algorithm Parameter # 33h When the Two MSI check digits option is selected, an additional verification is required to ensure integrity. Select one of the following algorithms. MOD 10/ MOD 11 (00h) *MOD 10/ MOD 10 (01h)
Page 61
Parameter Menus 4 - 65 GS1-DataBar Enable/Disable GS1 DataBar Omnidirectional Parameter # F0h 52h To enable or disable GS1 DataBar Omnidirectional, scan the appropriate bar code below. *Enable GS1 DataBar Omnidirectional (01h) Disable GS1 DataBar Omnidirectional (00h) Enable/Disable GS1 DataBar Limited Parameter # F0h 53h To enable or disable GS1 DataBar Limited, scan the appropriate bar code below.
Page 62
4 - 66 SE655 Decoded Linear Imaging Engine Enable/Disable GS1 DataBar Expanded Parameter # F0h 54h To enable or disable GS1 DataBar Expanded, scan the appropriate bar code below. *Enable GS1 DataBar Expanded (01h) Disable GS1 DataBar Expanded (00h) Convert GS1 DataBar to UPC/EAN Parameter # F0h 8Dh This parameter only applies to GS1 DataBar Omnidirectional and GS1 DataBar Limited symbols.
Select no code ID character, a Symbol Code ID character, or an AIM Code ID character. The Symbol Code ID characters are listed below. Symbol Code ID Character (02h) Aim Code ID Character (01h) *None (00h) Socket Mobile, Inc. CHS 7Ci, 7Di, 7DiRx Command Barcodes...
Numeric Bar Codes For parameters requiring specific numeric values, scan the appropriately numbered bar code(s). Socket Mobile, Inc. CHS 7Ci, 7Di, 7DiRx Command Barcodes...
Page 65
Numeric Bar Codes (continued) Cancel To change the selection or cancel an incorrect entry, scan the bar code below. Cancel Socket Mobile, Inc. CHS 7Ci, 7Di, 7DiRx Command Barcodes...