HP ProCurve 9304M Security Manual page 27

USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Select the Management link from the System configuration panel to display the Management configuration
panel.
3. Click Disable next to Web Management.
4. Click the Apply button to save the change to the device's running-config file.
5. Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change
to the startup-config file on the device's flash memory.
Disabling SNMP Access
SNMP is enabled by default on all HP devices. To disable SNMP, use one of the following methods.
USING THE CLI
To disable SNMP management of the device:
ProCurveRS(config)# snmp disable
To later re-enable SNMP management of the device:
ProCurveRS(config)# no snmp disable
Syntax: [no] snmp disable
June 2005
Securing Access to Management Functions
2 - 11