HP ProCurve 9304M Security Manual page 121

Displaying the Secure MAC Addresses on the Device
To list the secure MAC addresses configured on the device, enter the following command:
ProCurveRS(config)# show port security mac
Port Num-Addr Secure-Src-Addr Resource Age-Left
----- -------- --------------- -------- --------- ------------------
7/11 1
Syntax: show port security mac
This command displays the following information:
This Field...
Port
Num-Addr
Secure-Src-Addr
Resource
Age-Left
Shutdown/Time-Left
Displaying Port Security Statistics
You can display port security statistics for an interface or for a module.
For example, to display port security statistics for interface 7/11:
ProCurveRS# show port security statistics e 7/11
Port Total-Addrs Maximum-Addrs Violation Shutdown/Time-Left
----- ----------- ------------- --------- ------------------
7/11
Syntax: show port security statistics <portnum>
Table 5.3: Output from the show port security statistics <portnum> command
This Field...
Port
Total-Addrs
Maximum-Addrs
Violation
June 2005
0050.da18.747c Local
Table 5.2: Output from the show port security mac command
Displays...
The slot and port number of the interface.
The number of MAC addresses secured on this interface.
The secure MAC address.
Whether the address was secured using a local or global resource. See
"Local and Global Resources" on page 5-1 for more information.
The number of minutes the MAC address will remain secure.
Whether the interface has been shut down due to a security violation and
the number of seconds before it is enabled again.
1 1
Displays...
The slot and port number of the interface.
The total number of secure MAC addresses on the interface.
The maximum number of secure MAC addresses on the interface.
The number of security violations on the port.
Using the MAC Port Security Feature
Shutdown/Time-Left
10 no
0 no
5 - 5