HP ProCurve 9304M Security Manual page 148

Security Guide for ProCurve 9300/9400 Series Routing Switches
This field
Action Configuration:
Action Execution:
Quick Aging:
Not in Quick Aging mode
Normal age limit:
Quick age limit:
HW Flooding:
unknown-unicast:
broadcast:
multicast:
8 - 6
Table 8.2: Output of the show l2-cpupro actions command
Displays
The actions configured on the device.
Which actions have been enabled.
Whether the quick aging action has been enabled for a
condition.
Whether the device is in exhausted mode and the quick aging
action is in effect.
The age limit for CAM entries when the device is in normal
mode.
The age limit for CAM entries when the device is in exhausted
mode and the quick aging action is in effect.
Information about the three kinds of hardware-flooding actions.
Whether CAM entries for the unknown-unicast action have
been installed and whether the unknown-unicast action has
been enabled:
max entries: – The maximum number of Layer 2 CAM entries
that can be allocated for hardware flooding of unknown-unicast
traffic.
current entries: – The number of Layer 2 CAM entries currently
in use for hardware flooding of unknown-unicast traffic.
action mode: – Whether the device floods or drops unknown­
unicast traffic when this action takes place.
Whether CAM entries for the broadcast action have been
installed and whether the broadcast action has been enabled:
max entries: – The maximum number of Layer 2 CAM entries
that can be allocated for hardware flooding of broadcast traffic.
current entries: – The number of Layer 2 CAM entries currently
in use for hardware flooding of broadcast traffic.
action mode: – Whether the device floods or drops broadcast
traffic when this action takes place.
Whether CAM entries for the multicast action have been
installed and whether the multicast action has been enabled:
max entries: – The maximum number of Layer 2 CAM entries
that can be allocated for hardware flooding of multicast traffic.
current entries: – The number of Layer 2 CAM entries currently
in use for hardware flooding of multicast traffic.
action mode: – Whether the device floods or drops multicast
traffic when this action takes place.
June 2005