HP ProCurve 9304M Security Manual page 120

Security Guide for ProCurve 9300/9400 Series Routing Switches
Displaying Port Security Information
You can display the following information about the port security feature:
• The secure MAC addresses that have been saved to the startup-config file by the autosave feature
• The port security settings for an individual port or for all the ports on a specified module
• The secure MAC addresses configured on the device
• Port security statistics for an interface or for a module
Displaying Autosaved MAC Addresses
To display the secure MAC addresses that have been saved to the configuration by the autosave feature, enter the
following command:
ProCurveRS# show port security autosave
Syntax: show port security autosave
Displaying Port Security Settings
You can display the port security settings for an individual port or for all the ports on a specified module. For
example, to display the port security settings for port 7/11, enter the following command:
ProCurveRS# show port security e 7/11
Port Security Violation Shutdown-Time Age-Time
----- -------- --------- ------------- --------- -------
7/11 disabled
Syntax: show port security <module> | <portnum>
This command displays the following information
Table 5.1: Output from the show port security <module> command
This Field...
Port
Security
Violation
Shutdown-Time
Age-Time
Max-MAC
5 - 4
shutdown
Displays...
The slot and port number of the interface.
Whether the port security feature has been enabled on the interface.
The action to be undertaken when a security violation occurs, either
"shutdown" or "restrict".
The number of seconds a port is shut down following a security violation, if
the port is set to "shutdown" when a violation occurs.
The amount of time, in minutes, MAC addresses learned on the port will
remain secure.
The maximum number of secure MAC addresses that can be learned on
the interface.
Max-MAC
10 10 1
June 2005