HP ProCurve 9304M Security Manual page 116

Security Guide for ProCurve 9300/9400 Series Routing Switches
The following commands configure the HP device in Figure 4.7:
ProCurveRS(config)# aaa authentication dot1x default radius
ProCurveRS(config)# radius-server host 192.168.9.22 auth-port 1812 acct-port 1813
default key mirabeau dot1x
ProCurveRS(config)# dot1x-enable e 1
ProCurveRS(config-dot1x)# re-authentication
ProCurveRS(config-dot1x)# timeout re-authperiod 2000
ProCurveRS(config-dot1x)# timeout quiet-period 30
ProCurveRS(config-dot1x)# timeout tx-period 60
ProCurveRS(config-dot1x)# max-req 6
ProCurveRS(config-dot1x)# exit
ProCurveRS(config)# interface e 1
ProCurveRS(config-if-e100-1)# dot1x port-control auto
ProCurveRS(config-if-e100-1)# dot1x multiple-hosts
ProCurveRS(config-if-e100-1)# exit
4 - 30 June 2005