HP ProCurve 9304M Security Manual page 73

Method Parameter
enable
local
tacacs
tacacs+
radius
none
USING THE WEB MANAGEMENT INTERFACE
To configure an authentication-method list with the Web management interface, use the following procedure. This
example to causes the device to use a RADIUS server to authenticate attempts to log in through the CLI:
1. Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2. Select the Management link to display the Management configuration panel.
3. Select the Authentication Methods link to display the Login Authentication Sequence panel, as shown in the
following example.
June 2005
Table 2.8: Authentication Method Values (Continued)
Description
Authenticate using the password you configured for the Super User
privilege level. This password is configured using the enable super-
user-password... command. See "Setting Passwords for Management
Privilege Levels" on page 2-14.
Authenticate using a local user name and password you configured on
the device. Local user names and passwords are configured using the
username... command. See "Configuring a Local User Account" on
page 2-17.
Authenticate using the database on a TACACS server. You also must
identify the server to the device using the tacacs-server command.
Authenticate using the database on a TACACS+ server. You also must
identify the server to the device using the tacacs-server command.
Authenticate using the database on a RADIUS server. You also must
identify the server to the device using the radius-server command.
See "Configuring RADIUS Security" on page 2-38.
Do not use any authentication method. The device automatically
permits access.
Securing Access to Management Functions
2 - 57