HP ProCurve 9304M Security Manual page 135

Table 6.4: Output from the show authenticated-mac-address command (Continued)
This Field...
Time
Age
CAM Index
Displaying the Authenticated MAC Addresses
To display the MAC addresses that have been successfully authenticated, enter the following command:
ProCurveRS# show auth-mac-addresses authorized-mac
Syntax: show auth-mac-addresses authorized-mac
Displaying the Non-Authenticated MAC Addresses
To display the MAC addresses for which authentication was not successful, enter the following command:
ProCurveRS# show auth-mac-addresses unauthorized-mac
Syntax: show auth-mac-addresses unauthorized-mac
June 2005
Displays...
The time at which the MAC address was authenticated. If the clock is
set on the HP device, then the actual date and time are displayed. If
the clock has not been set, then the time is displayed relative to when
the device was last restarted.
The age of the MAC address entry in the authenticated MAC address
list.
If the MAC address is blocked, the index entry for the Layer 2 CAM
entry created for this MAC address. If the MAC address is not
blocked, either through successful authentication or through being
placed in the restricted VLAN, then "N/A" is displayed. If the hardware
aging period has expired, then "ffff" is displayed for the MAC address
during the software aging period.
Configuring Multi-Device Port Authentication
6 - 13