Standards - maxon motor ESCON Module 50/5 Hardware Reference Manual

2.2

Standards

The described device has been successfully tested for compliance with the below listed standards. In
practical terms, only the complete system (the fully operational equipment comprising all individual com-
ponents, such as motor, servo controller, power supply unit, EMC filter, cabling etc.) can undergo an
EMC test to ensure interference-free operation.
Important Notice
The device's compliance with the mentioned standards does not imply its compliance within the final,
ready to operate setup. In order to achieve compliance of your operational system, you must perform
EMC testing of the involved equipment as a whole.
Generic standards
Applied standards
Environmental
standards
Safety standards
Reliability
Table 2-5
maxon motor control
ESCON Servo Controller
ESCON Module 50/5 Hardware Reference
Electromagnetic compatibility
IEC/EN 61000-6-2
IEC/EN 61000-6-3
IEC/EN 61000-6-3
IEC/EN 55022
(CISPR22)
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-6
IEC/EN 60068-2-6
MIL-STD-810F
UL File Number E243951; unassembled printed circuit board
MIL-HDBK-217F
Standards
Document ID: rel4734
Edition: November 2014
© 2014 maxon motor. Subject to change without prior notice.
Immunity for industrial environments
Emission standard for residential, commercial and light-
industrial environments
Radio disturbance characteristics/radio interference
Radiated, radio-frequency, electromagnetic field immunity
test >10 V/m
Electrical fast transient/burst immunity test ±2 kV
Immunity to conducted disturbances, induced by radio-
frequency fields 10 Vrms
Others
Environmental testing – Test Fc: Vibration (sinusoidal)
Random transport
Reliability prediction of electronic equipment
Environment: Ground, benign (GB)
Ambient temperature: 298 K (25°C)
Component stress: In accordance with circuit diagram and
nominal power
Mean Time Between Failures (MTBF): 639'548 hours
Specifications
Standards
2-9